Week12,HW10

互動技術 ARDUINO 1127 練習

練習一燈泡循序漸進

練習二燈泡不按照規律亮燈

自由發揮創意
燈泡排成 菱形

練習三 程式碼：

int sensorPin = A0;    // select the input pin for the potentiometer
int ledPin = 13;      // select the pin for the LED
int sensorValue = 0;  // variable to store the value coming from the sensor

void setup() {
  // declare the ledPin as an OUTPUT:
  pinMode(13, OUTPUT); 
  pinMode(12, OUTPUT);
  pinMode(11, OUTPUT);
  pinMode(10, OUTPUT);
  pinMode(9, OUTPUT);
  pinMode(8, OUTPUT);
  pinMode(7, OUTPUT);
  pinMode(6, OUTPUT);
  Serial.begin(9600);
}

void loop() {
  // read the value from the sensor:
  sensorValue = analogRead(sensorPin); 
  Serial.println(sensorValue);  
  // turn the ledPin on  
  digitalWrite(6, HIGH); 
  delay(sensorValue); 
  digitalWrite(7, HIGH);
  delay(sensorValue); 
  digitalWrite(8, HIGH);
  delay(sensorValue);   
  digitalWrite(9, HIGH);
  delay(sensorValue);  
  digitalWrite(10,HIGH);
  delay(sensorValue); 
  digitalWrite(11, HIGH);
  delay(sensorValue);   
  digitalWrite(12,HIGH);
  delay(sensorValue);  
  digitalWrite(13, HIGH);    
  delay(sensorValue); 
    
  digitalWrite(6, LOW); 
  delay(sensorValue); 
  digitalWrite(7, LOW);
  delay(sensorValue); 
  digitalWrite(8, LOW);
  delay(sensorValue);   
  digitalWrite(9, LOW);
  delay(sensorValue);  
  digitalWrite(10, LOW);
  delay(sensorValue); 
  digitalWrite(11, LOW);
  delay(sensorValue);   
  digitalWrite(12, LOW);
  delay(sensorValue);  
  digitalWrite(13, LOW);    
  delay(sensorValue);   
  
  digitalWrite(13, HIGH);
  digitalWrite(12, HIGH); 
  digitalWrite(11, HIGH); 
  digitalWrite(10, HIGH);
  delay(sensorValue);
  digitalWrite(9, HIGH);
  digitalWrite(8, HIGH);
  digitalWrite(7, HIGH);
  digitalWrite(6, HIGH);
  delay(sensorValue);
  digitalWrite(6, HIGH);
  digitalWrite(7, HIGH); 
  digitalWrite(8, HIGH); 
  digitalWrite(9, HIGH);
  delay(sensorValue);
  digitalWrite(10, HIGH);
  digitalWrite(11, HIGH);
  digitalWrite(12, HIGH);
  digitalWrite(13, HIGH);
  delay(sensorValue);    
  // stop the program for <sensorValue> milliseconds:
  delay(sensorValue);          
  // turn the ledPin off:         

  
  digitalWrite(13, LOW); 
  delay(sensorValue); 
  digitalWrite(12, LOW);
  delay(sensorValue); 
  digitalWrite(11, LOW);
  delay(sensorValue);   
  digitalWrite(10, LOW);
  delay(sensorValue);  
  digitalWrite(9, LOW);
  delay(sensorValue); 
  digitalWrite(8, LOW);
  delay(sensorValue);   
  digitalWrite(7, LOW);
  delay(sensorValue);  
  digitalWrite(6, LOW);  
  delay(sensorValue);  
}